The PA-P200A is a 200 amp percussive arc linear TIG welding power supply that is based on our PA-H programmable TIG range. These units incorporate additional power electronics, interfacing and software to facilitate highly controlled percussive arc processes to be performed with a high degree of process control, monitoring and checking. Ideal for on axis stranded wire to pin terminations.
Full programmatic control of the specially designed low inertia percussive weld head facilitates an intuitive visual correlation and means of adjustment between the controlled arc and the weld head flight time. Built-in window tolerancing allows process repeatable characteristics to be captured and monitored in real time for every joint made, both in the unit and via remote communication channels.
Model | PA-P200A | |
---|---|---|
Maximum Output Current | 200 Amps DC Peak | |
Duty cycle | 0.75%@150A | |
Open circuit voltage | 80V D.C. | |
Arc starting voltage | 12KV | |
Head drive | Programmable to 50VDC Max - 2A Non continuous | |
Mains supply 50/60Hz | 115VAC +/-15% or 230VAC +/- 15% | |
Up slope time (0.1 ms steps) | 0.1 - 9.9 ms | |
Peak weld time (0.1 ms steps) | 0.1 - 9.9 ms | |
Down slope time (0.1 ms steps) | 0.1 - 9.9 ms | |
Dwell time | 10 - 99 ms | |
Cooling (overheat protected) | Fan | |
Gas pre / post purge timing | Programmable | - |
Dimensions (D x W x H) | 490 x 270 x 300mm | |
Weight | 24 kg |
Send your sample to one of our technology centers in Europe for an evaluation. We will then determine which solution meets your needs best. AMADA WELD TECH offers feasibility testing and application consulting.